ACU Approved Toe Guard for Swingarms
ACU Approved Toe Guard for Swingarms

NEW! ACU Approved toe guards for swingarms. These are required to pass ACU scrutineering when racing and protect hands and feet from being mangled through the rear wheel sprocket! Easily fitted to most swingarms with variable mounting points from 30-65mm between centres.

Available in plain aluminium or painted black

Online Shop

You can browse through the categories or use the Search to find items in our online shop.

If you don't see what you need, just Contact Us and we will be happy to help.

International (non-UK) Orders

You are welcome to order from us if you are not in the UK, but please read our International Orders page first to ensure that you understand our conditions, otherwise your order will not be processed and will be refunded in full.

 

Search Online Shop

Search for:
Search in:

Browse:

Shop Home » New Parts » Service Items & Parts

Billet Race Sump Plug
Billet Race Sump Plug

Our Ducati race sump plugs are made from billet aluminium and then hard anodised to provide improved wear resistance. No longer will you struggle to remove the sump plug as we have done away with the recessed allen socket and incorporated an external hex-head to allow the use of a socket. Each face has been pre-drilled too, to make lock-wiring your sump plug as easy as possible. These will also fit the oil filler cap, as it uses the same sized thread! A must for the Ducati racer. Note: Not for use on Deep Sump engines - a version for these will follow!

Ref: ASP001
Price: £ 10.99
Billet Race Sump Plug for Deep-Sump / TestaStretta engines
Billet Race Sump Plug for Deep-Sump / TestaStretta engines

Our Ducati race sump plugs are made from billet 7075-T7 aluminum alloy and then anodised to provide improved wear resistance. No longer will you struggle to remove the sump plug as we have done away with the recessed allen socket and incorporated an external hex-head to allow the use of a socket. Each face has been pre-drilled to make lock-wiring your sump plug as easy as possible. A must for the Ducati racer.

Note: Only for use on Deep Sump engines - 1198, 1098, 848, D16RR, 999, 749, MultiStrada 1200, Diavel. Please check to confirm this is the correct sump plug for your engine!

Ref: ASP002
Price: £ 10.99
Ducati Clutch Spring and Cap Kit
Ducati Clutch Spring and Cap Kit

All you need to bling up your clutch! This clutch kit comprises of 6x Stainless Clutch Springs, 6x Aluminium Anodised Clutch Spring Caps and 6x Stainless Spring Bolts. Replace those nasty (and rusting!) clutch springs to give your clutch the look it deserves! Available with Black, Red or Gold spring caps.

Suitable for all Ducati dry clutches, including: 748, 916, 996, 998, 749, 999, Monster, ST, SuperSport, Hypermotard, etc! Note that these are NOT suitable for 1098, 1198 and Streetfighter clutches unless you re-use your original clutch spring caps.

Ref: ASK001
Price: £ 26.99
Cap Colour
Clutch Pressure Plate Bearings - SKF
Clutch Pressure Plate Bearings - SKF

Genuine SKF Bearing. Fully sealed clutch pressure plate bearing, type 6201 2RS GL. Dimensions 12 inner x 32 outer  x 10 thickness in mm.

Standard fit for OEM and most aftermarket clutch pressure plates.

Ref: ACB001
Price: £ 4.49
Rubber Well Nuts (M5 x 15) - Pack of 8
Rubber Well Nuts (M5 x 15) - Pack of 8

Rubber well nuts (also known as Rawl Nuts) make an appearance all over your Ducati, used where vibration is a problem to stop bolts undoing themselves. Over time they will harden, crack and sometimes even fall to pieces. We sell them in packs of 8 well nuts for a fiver - Ducati sell them at £6 each! This is for a pack of 8 rubber well nuts to accept M5 bolts, the well nut is 15mm in length.

Ref: AWN0M5
Price: £ 4.99
Rubber Well Nuts (M6 x 15) - Pack of 8
Rubber Well Nuts (M6 x 15) - Pack of 8

Rubber well nuts (also known as Rawl Nuts) make an appearance all over your Ducati, used where vibration is a problem to stop bolts undoing themselves. Over time they will harden, crack and sometimes even fall to pieces. We sell them in packs of 8 well nuts for a fiver - Ducati sell them at £6 each! This is for a pack of 8 rubber well nuts to accept M6 bolts, the well nut is 15mm in length.

Ref: AWN0M6
Price: £ 4.99
 

Solution Graphics

 

Search our shop for products:

Enter words from the title, description or part number to search for parts.

 

Enter your 13 digit tracking code to track your order online.

No tracking number? If you didn't receive an email from PayPal, simply login to PayPal and check your transaction to find the tracking number supplied.

 

Subscribe to our mailing list to receive information on latest products, specials offers and more. Just enter your email address into the box and click the button.

With each email we send you get details on how to unsubscribe. We promise that we won't share your email address with anyone else either!

 

Find us on Facebook and become our friend!
Find us on Facebook

Back to Top

Avanti Race Parts - Ducati Parts and Accessories for Road and Race Motorcycles. Race and Trackday Preparation and Services. Genuine parts and accessories, Ducati Performance Parts and Accesories, Race Paintwork, Parts, Anodising Service.Avanti, Ducati, Motorcycles, Race, Road, Trackday, Preparation, Parts, Accessories, Services, Performance, Anodising, Superbike, Carbon, Fibre, Clutch, Covers, Guards, Pressure, Plates, Fairing, STM, Brembo, SpeedyMoto