NEW! ACU Approved toe guards for swingarms. These are required to pass ACU scrutineering when racing and protect hands and feet from being mangled through the rear wheel sprocket! Easily fitted to most swingarms with variable mounting points from 30-65mm between centres.

Available in plain aluminium or painted black

Accossato universal brake or clutch lever (they're both the same!) for the early Ducati master cylinders known as "coffin" m/cs, as they have a built-in reservoir with a rectangular lid. Used on Monsters, SuperSports and others. Please check and compare to your original lever to ensure correct fitting.

Accossato brake lever to fit Ducati master cylinders (Brembo Goldline) used on 916/748 line along with Monsters, SS and ST up to 1999. This is known as the "grey" lever and has a larger spindle hole (12mm) than the later silver levers. Please check and compare to your original lever to ensure correct fitting.

Accossato clutch lever to fit Ducati master cylinders (Brembo Goldline) used on 916/748 line along with Monsters, SS and ST up to 1999. This is known as the "grey" lever and has a larger spindle hole (12mm) than the later silver levers. Please check and compare to your original lever to ensure correct fitting.

Accossato brake lever to fit Ducati master cylinders (Brembo Goldline) used on 916/748 line along with Monsters, SS and ST from 1999 onwards. This is known as the "silver" lever and has a smaller spindle hole (8mm) than the earlier grey levers. Please check and compare to your original lever to ensure correct fitting.

Accossato clutch lever to fit Ducati master cylinders (Brembo Goldline) used on 916/748 line along with Monsters, SS and ST from 1999 onwards. This is known as the "silver" lever and has a smaller spindle hole (8mm) than the earlier grey levers. Please check and compare to your original lever to ensure correct fitting.

Accossato "flip-up" brake lever to fit Ducati master cylinders (Brembo Goldline) used on 916/748 line along with Monsters, SS and ST from 1999 onwards. This is known as the "silver" lever and has a smaller spindle hole (8mm) than the earlier grey levers. Articulated lever allows it to "flip-up" in the event of a crash, and simply pushes back into place. Please check and compare to your original lever to ensure correct fitting.

Accossato "flip-up" clutch lever to fit Ducati master cylinders (Brembo Goldline) used on 916/748 line along with Monsters, SS and ST from 1999 onwards. This is known as the "silver" lever and has a smaller spindle hole (8mm) than the earlier grey levers. Articulated lever allows it to "flip-up" in the event of a crash, and simply pushes back into place. Please check and compare to your original lever to ensure correct fitting.

Accossato "flip-up" brake lever to fit Ducati master cylinders (Brembo radial) used on 749, 999, 848, 1098, 1198, Hypermotard, Streetfighter, etc, from 2003 onwards. Articulated lever allows it to "flip-up" in the event of a crash, and simply pushes back into place. Please check and compare to your original lever to ensure correct fitting.

Accossato "flip-up" clutch lever to fit Ducati master cylinders (Brembo radial) used on 749, 999, 848, 1098, 1198, Hypermotard, Streetfighter, etc, from 2003 onwards. Articulated lever allows it to "flip-up" in the event of a crash, and simply pushes back into place. Please check and compare to your original lever to ensure correct fitting. Note: Brake lever shown for reference, but clutch is mirror image.

Accossato universal brake or clutch lever (they're both the same!) to fit Brembo Race Radial master cylinders. Available in 16, 18 and 20 ratio. Please check and compare to your original lever to ensure correct fitting.

Accossato "Flip-Up" brake lever to fit Brembo Race Radial master cylinders. Articulated lever allows it to "flip-up" in the event of a crash, and simply pushes back into place. Available in 16, 18 and 20 ratio. Please check and compare to your original lever to ensure correct fitting.

Accossato "Flip-Up" brake lever to fit Brembo Race Radial master cylinders. Articulated lever allows it to "flip-up" in the event of a crash, and simply pushes back into place. Available in 16, 18 and 20 ratio. Please check and compare to your original lever to ensure correct fitting.

Accossatto brake lever is not only articulated to flip-up in the case of a crash, but also has a remote adjuster to allow span adjustment on the move.

Easy to fit, this lever is for use with Brembo Radial master cylinders, fitted to most Ducatis from 2003 onwards, such as the 749, 999, 848, 1098, 1198, Streetfighter and Hypermotard.

Please check and compare to your original lever to ensure correct fitting.

The very latest in trick brake levers, this Accossatto lever is not only articulated to flip-up in the case of a crash, but also has an electronic adjuster. The separate mounting plate contains two switches to adjust the span of the lever, so no more fiddling to manually adjust the mechanical remote adjust.

Easy to fit, this lever is for use with Brembo Radial master cylinders, fitted to most Ducatis from 2003 onwards, such as the 749, 999, 848, 1098, 1198, Streetfighter and Hypermotard.

Please check and compare to your original lever to ensure correct fitting.

Accossato remote span adjuster allows span adjustment on the move. For all Brembo Radial master cylinders and levers, including those fitted as OEM to 749, 999, 848, 1098, 1198, Desmosedici, Streetfighter and Hypermotard.

Please check and compare to your original lever to ensure correct fitting.